Heat Wave Skynet Z87+ Black Lens

Each pair meets or exceeds Z87+ Standards right out the box.

Our lens is injection molded from thick 1.9mm shatter-resistant polycarbonate that is built to withstand Z87 Mass Impact Standards.

Integrated side-shields provide lateral protection and allow the frame to meet ANSI Z87+ requirements.

Each pair of Skynet is boldly marked Z87+ on the frame, arm and lens.

Disclaimer: Removing arms, and or changing configuration in any way voids Z87 compliance.

Rubberized Hytrel® (TPC-ET thermoplastic elastomer) touchpoints on the nose & arms provide a comfortable, non-slip fit that you can wear seamlessly all day long.

Low profile dual injected arms have been designed for performance across all conditions, allowing for a better fit with headwear from hats, helmets, and hearing protection.

Hytrel® inserts provide a higher resistance to both natural and man-made chemical agents increasing durability and longevity.

The Heat Wave LPF system is a durable, optically clear protective film applied over the lens, creating a sacrificial outer layer that is significantly more scratch-resistant than the lens surface itself.

LPF film absorbs abrasion, wear, and daily abuse, and when it finally reaches its limit, you replace the film not the lens.

Specifications by the numbers:

The Skynet lens is molded from the ground up using advanced manufacturing techniques that remove traditional frame structure across the lens — delivering zero horizontal obstructions, reduced weight, and increased rigidity through a molded structural ridge.

The lens meets or exceeds mass impact requirements for Z87 standards, and is injection molded at a thickness of 1.9mm to the highest standards and tested to ensure optimal clarity, along with color and light transmission standards.

Lenses are U6:L3 UV400 - 100% UVA / UVB blocking

Black Lens VLT = 8% / Cat 3
Black Polarized Lens VLT = 8% / Cat 3